Insulated aluminum processing two classification

Insulation aluminum processing technology can be divided according to two categories: embedded and dispensing roll style. At present, there is no corresponding standard insulation Aluminum Film in Europe insulation systems generally use mass of technology, North America and Korea perform AAMA TIR-A8-90 plastic injection-type aluminum alloy structure building insulation performance specifications. Our bridge insulated walls and windows and doors in both the pass there dispensing strip style.

(1) Rolling embedded

Is dedicated heat insulation Aluminum Diamond Plate doors and windows, inside and outside the two aluminum insert special notch, through special machinery rolling, leaving the insulation strip fused with internal and external profiles, this approach in European countries, especially Germany and Italy, Central European countries generally adopted.

(2) dispensing formula

The basic principle is to treat aluminum alloy into two parts between the two using a specially formulated polymer insulating polymer eleven off hot glue to combine. Thus, one hundred aluminum alloy is formed between the inner and outer part of the effective heat insulation layer, so that through the door window frame profiles or fan heat dissipation pathway is blocked, to achieve energy-efficient insulation purposes.

Aluminum processing how to avoid bending phenomenon

First, we need to know, straight This process is aluminum bending phenomenon of multiple links. The staff responsible for straightening straightening must pay attention to when your hands are using force. Excessive force may be deformed shapes, shut, orange peel, etc.; Conversely, if the force is too small will result in not straight tone generated profiles, resulting in bending.

The second is the aluminum extrusion framed, this session is very important. After the saw cut lengths, it is often necessary to carry framed it. Framed, the staff in charge of this process must pay attention to the size of the material, and the material is still flat die with a pipe to pull out of the material. Also, if billet aluminum surface after aging, the hardness has been compliance is detected, then the profile will not be so easy to become curved, but still have to pay attention when shelves, ends when lifting materials, aluminum try to maintain stability and prevent large fluctuations, aluminum sheet profiles have been severe limitation of the floating will cause some curved profiles.

Aluminum plant equipment operation and maintenance rules

From the law of that aluminum sheet equipment wear, normal wear the longer the better use of equipment. In other words, to make the use of equipment in use on the best, we must ensure that normal wear and tear of equipment equal to the natural life. Thus, we can draw such a basic concept, that is, the device is put into production after use, I hope it is in use of the available time better.

Device performance level of availability of time is determined by the equipment downtime. To achieve this goal, various factors involved, it is the device itself, in addition to the quality of the composition (including performance reliability and durability, the structure is reasonable, the selection of advanced, reasonable, processing, manufacturing quality assurance, etc.) is the basic condition, the use of the correct, rational use, well maintenance, careful management, the objective is to extend the life of equipment requirements, give full play equipment effectiveness, improve the basic conditions for the time availability . Equipment downtime, the more work, the less time available, the time may be lower utilization; Conversely, time availability is higher.

Our vision is to require device can rate one hundred percent of the time. Practical work countless examples show that the same model, same manufacturer in the same period production equipment used in the same environmental conditions, because the conditions of use and maintenance pros and cons, effects a great disparity. This situation not only between two devices, even in the same piece of equipment will vary depending on the operational use of the use of personnel, maintenance level differences, the use effect is not the same.